Cast Iron Sink Restoration Project

Dream Home Supply, LTD.
by Dream Home Supply, LTD.
We just love cast iron sinks and this one was in great condition for its age. Other than some minor wear and tear from years of service, this sink was in pretty good shape. The question, was; can we restore it and make it more suitable for this kitchen restoration project since white really wasn't going to go with the design plan.
As you can see, there was just some minor cleaning that needed done before we started our process of restoration.
We began by putting some base coats of our products on and getting it to as smooth of a surface as we could before we get ready for coloration.
We don't have a picture of the previous step, but we painted it black first so that when the hammered copper paint does it's hammer texture that it doesn't show the white color of our products. This took two coats of hammered copper painted and then two coats of our countertop epoxy.
Here is a close up of the detail in the finish! What do you think... worth the effort??? We sure think it was!!!!
Here is a photo of this restored beauty in it's final resting place! We think it sure looks much better with our resurfaced countertops than a white one would have!
Here is a wider angle of the entire sink area before we started this entire kitchen restoration. We completely changed the look with no tear-out and waste of existing materials!!!
Frequently asked questions
Have a question about this project?
  3 questions
  • Michelle Cornelius Michelle Cornelius on May 16, 2016
    What was the name of the epoxy coating used?
  • Dee Sapp Dee Sapp on Aug 16, 2018

    Our cast iron black enamel. Only one side appears etched finish but smooth. What you recommend.

  • Kathy Kathy on Apr 03, 2019

    How about cleaning? Can cleanser be used or is there a special product for cleaning.

Join the conversation
2 of 19 comments
  • Dream Home Supply, LTD. Dream Home Supply, LTD. on May 16, 2016
    Hi Michelle! We used Granicrete countertop epoxy. We are certified through them to use their products, but they don't sell to the general public. However, you should be able to achieve the same thing with any countertop epoxy. We did use 2 coats since it is a self-leveling epoxy and it must be sanded between coats to get the proper adhesion.
  • Jessica Musnitzky Jessica Musnitzky on Apr 05, 2020

    Love this! Great job.