Vintage End Tables Get an Update!

3 Materials
2 Days

One afternoon, hubby and I went for a drive and stopped at one of those kind of scary road side "sale" buildings. You know the kind of place, dark, smelly, and a tad like something out of a horror flick. Anyway, we stumbled across this set of end tables. They had seen better days, but we quickly saw the potential! So, after a bit of haggling and a run to the ATM to get cash, we purchased them for $12. Loaded them into the truck and brought them home...then the fun began!

Vintage End Table

Here you can see one of the tables before we started. Some people just don't see the potential, but we do! Nothing makes me happier than deciding what to do with a piece that will bring it a whole new life.

For this project you'll need:

  • vintage end tables
  • sandpaper
  • base coat
  • chalk paint
  • paintbrush
  • polycrylic topcoat
Take the Tables Apart
Take the Tables Apart, Sand, Paint, and Reassemble

I know, I know, I missed some pictures. At this point if you follow any of my projects, you know I always manage to miss taking some. Anyway, here is the setup I had going for this project. We took the tables apart, sanded them down, base coated everything. For this project, I base coated in granite gray. I thought the gray basecoat would look cute with the seafoam chalk paint. Here you can see the table tops (on the right), the legs, and all the spindles. To make drying the spindles easier, I found a piece of foam, punched holes in it and stuck the spindles in to keep them upright while drying! After chalk painting, I distressed to allow some of that gray to show! Then it was time to reassemble the tables.


Here is a side view of one of the tables after I reassembled them. This allowed me to see how the distressing looked. I touched up what I felt needed a little more distressing before adding the poly.

Add Poly
Add Poly

Here is a front view of one of the tables. I like to check pieces from every angle so that I am sure the distressing looks right. You never know what angle it will be setting in the home, and want to make sure it looks great from any angle. Poly and done! Notice how the color looks different depending on the lighting? *sigh* I have to take pictures in different lighting.

DIY Vintage End Table Makeover

I actually used wipe on poly for these. Usually I con my husband into doing regular poly (I have him convinced that I can't do it right 🤣). I prefer poly over wax on pieces that will see heavier use. I love how these turned out! As did the lovely lady that purchased them.

DIY Painted Vintage End Table

This is a picture from the lovely lady that purchased the end tables. She wanted them to add a pop of color in her guest room. Lovely!

Suggested materials:

  • Chalk paint (seafoam)   (Michaels)
  • Chalk paint (seafoam)   (Michaels)
  • Rustoleum granite gray spray paint   (WalMart)
See all materials

Frequently asked questions

Have a question about this project?

3 of 6 questions
  • Jacqui Jacqui on Jun 17, 2018

    Wow, I didn't know u had to take everything apart. How do u know which spindle goes where? And it's stuff like that that makes me scared to even start painting my furniture. I'm a beginner too afraid to begin.

  • Crystal Crystal on Nov 01, 2018

    What kind of sander to you use and prefer?

  • Bernice H Bernice H on Nov 25, 2019

    I know your post is from quite a while back,but I love the tables. Nicely done. Those kind of tables are so useful especially in a small home. Where are they nowadays? I never run into them at yard and estate sales. I would love to have one or two. Anyway..beautiful long does your process take?


Join the conversation

6 of 18 comments
  • Loretta Loretta on Jan 12, 2019

    I have 2 my Mom made without power tools...they are an ugly brown paint my Dad bought instead of stain Mom used it... I am so doing this for our guest bedroom Thank you for the post

  • Lori Ward-Laatsch Lori Ward-Laatsch on Sep 21, 2020

    We made a sitting bench out of 2 of these years ago, it was in a flip magazine I think. Anyway it was for my son cut a board that fit on the 2 tables butted together, the shelf on the ends, then use fabric and staples to secure the fabric to the piece of wood. Then attached it with screws through the bottom. Of course I we painted the tables first. It was a black table with a cushion that was stripes of white, grey, red and black. Wish I had a picture that was before we had a smart phone lol