Lazy Susan RE-DO...Organize the Chaos
Resources for this project:
NotHermione on Jan 19, 2019
My suggestion keeps disappearing.
You might try making partitions, a base plate and a top piece with dowels connecting them. Glue the dowels in.place to hold partition together. Height = height of that individual tray. I would taper the inside edge to accomodate the smaller space available near the spindle. Caulk or use a non-permanent 'glue' to hold it in place better. The base of the partition should make it quite stable.
Basically, sandwich dowels between 2 pieces of wood, 1 top, 1 bottom. Taper the spindle edge to accommodate the less space available there. Drill holes for dowels and glue dowels in place. Position the partitions in place. Caulk in place if needed. They easily moveable when they need to be, pull up and scrape away old caulk.