Quick, Easy, Inexpensive DIY Wine Racks!
Totally customizable, made in a flash for cheap, these wine racks are handy and versatile!
So the hubs asked for some "eh storage racks for wine, nothing fancy." I can't not put a little oomph into 'em, so after some web surfing for inspiration, I came up with this easy-to-create design. And since this is temporary short term storage, cork up isn't an issue.
All I needed was two pieces of 1x6, a hole saw, some stain and a few screws and this puppy was together in an instant. Come read all the details about this and loads of other fun things over on my blog Flipping the Flip at humboldtartdept.blogspot.com!
After mmm, some math, I came up with the layout and drilled away.
A little sanding with the rotary tool and it was assembly time.
I placed the drilled out board centered on a line 1.5" in from the edge, pilot drilled some holes through the back side and connected everything with a few screws.
Once everything was together, I slapped on some Watco Danish Oil, let that dry and the next day I screwed them into the wall using some handy dandy wall anchors.
Pretty awesome, yeah? Each holds a full case. And they're totally customizable too -- change the sizes, change the board width/length, change the color...you name it! Come see more on my blog by clicking the link below!
Want more details about this and other DIY projects? Check out my blog post!
Published July 6th, 2015 7:11 PM
3 of 55 comments