Convenient Cord Keepers
by
Jeanne Johnson Ortego
(IC: homeowner)
3 Materials
$1
15 Minutes
Easy
I'm trying to get things off the floor so that my robot vacuum can work unhindered by electrical cords. This week's challenge was a Command Hook Hack, so I was happy to try them to keep back a few cords. I'll show you how easy it was:
First I purchased some self-adhesive hooks from Dollar Tree for - you guessed it! A dollar!
This was the mess that I was hoping to tame.
After reading the directions, I cleaned the space above the baseboard where I wanted to stick the hooks with alcohol. Caution: Don't rub too hard - this stuff can strip the paint!
I applied the hooks just above the baseboard so that the surge protector will be above it, not resting on the floor.
I used a third hook to hold up my phone charger cord. This will hold it at a convenient height, so that I can reach it from my bed, rather than having to crawl under the bed to find it. I use the edge of the bookshelf as a nightstand, and this lower shelf is perfect for charging my phone at night.
That's it! It's that easy to corral the cords plaguing you! I'll clip back any slack in them with binder clips. I can even place another command hook along the wall and hook the binder clips to it to prevent dragging on the floor, if needed. This didn't take 15 minutes, and that included moving the bed away from the wall and back. However, to make sure the hooks stay, you have to wait 12 hours for the adhesive to set.
Enjoyed the project?
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published May 22nd, 2018 10:01 PM
Comments
Join the conversation
2 of 9 comments
-
Jeanne Johnson Ortego on May 27, 2018
Thank you, Wendy!
-
-
Mike Williamson on May 27, 2018
You're welcome. I hope my tip proves helpful to you, Jeanne.
-
Frequently asked questions
Have a question about this project?
How are you holding the heavy power strip against the wall above the baseboard? I see the command hook holding the cord, but it looks like something must be holding the strip or it would droop down over the baseboard.
Thanks.