Plastic Bags Rolls Organizer

Natasha Benua
by Natasha Benua
30 Minutes
Easy
I created this Plastic Bags Rolls Organizer in just 30 minutes and free of charge :) Here's how:
My bag storage went from total mess to huge success :)



First take a large coffee cardboard tube and prime it (use any water based paint you have) and let it dry.
Then you will make the slits. First mark and cut off long and narrow vertical holes with an X-acto knife- be careful!
Then measure the diameter of the tube using a ruler.
And then prepare 6 square cardboard pieces
They should be made with a side size 1 cm shorter than the tube diameter. Just a bit of math ;)
Fold each piece in a middle - now we are ready to glue the inside the divider
Then glue all of the 6 pieces in between each other. Like this...
The inside divider must look like on the picture above. This will create the compartments inside the container.
Place the divider inside the tube, paint it (I prefer spray paints) in your favorite colour and fill it up with bags. I put a different size bag in each compartment and labeled it :) Give it a try yourself!
Ta-dah!
Frequently asked questions
Have a question about this project?
  1 question
  • Luc29355650 Luc29355650 on Aug 22, 2017

    WILL this also work for aluminum foil, wax paper, and saran wrap if I get the container large enough and remove cutting edges and staple to the cardboard? Works in My head but, not sure if it would work. Don't want My first project to flop. Thanks

Comments
Join the conversation
 4 comments
Next