Cement Sneaker Planter

4 Materials
$20
2 Hours
Easy

I saw a cement planter that someone made using a rain boot and I thought it would be really cute to make a planter out of a Converse high top sneaker. I love experimenting with unique shapes of existing items to make planters out of. Why not a cement sneaker planter?


My biggest challenge was actually just trying to find cheap high top converse sneaks. I was hoping to find an old pair at a Goodwill, but I skipped the trip and took the easy way out and ended up getting a pair on eBay for 12 bucks.

Click to subscribe to my You Tube channel. You'll be notified of all my new video tutorials!

To learn more about the differences between different types of concrete and cement craft mixes, download my  Free Pocket Guide To Cement and Concrete Crafting Mixes.

This is a great project for making a quick and unique planter!


STEP 1:


Create drainage holes using a drill. Start with a smaller drill bit and then switch it out to a larger one.

I had one hole that was in a spot much thicker than the rest where I had to make several passes.


STEP 2:


Take the markers and push them through the holes so that only the cap is left inside.


Make sure the open end of the cap is on the underside so that cement doesn’t get inside it and that it’s not sticking out of the bottom too far. You want the sneaker to stand flat, so if the marker is sticking out it will impede your ability to coat it with cement.


STEP 3:


Mix the cement with water. You want the consistency to be like a milkshake.


STEP 4:


Pour it into the sneaker to coat the inside. Be sure to get all the fabric coated so water doesn’t seep through and create mold. After the inside is coated, use your hands to scoop the cement onto the outside of the sneaker.


Keep going around the sneaker until it’s fully coated. Be sure to get the laces, under the laces and the tongue.

STEP 5:


Next wipe the cement off of any spots with rubber. Start with a dry paper towel, then use a wet one. I wanted the Converse logo to be visible, so I also wiped that off.


STEP 6:


Let it cure. This can take 1 to 3 hours, depending on temperature and humidity of your working environment. I actually put mine in the sun to speed up curing time.

STEP 7


Once it is cured, remove the drainage caps/marker caps with the pliers.

STEP 8:


Use a brush to redcoat with a thin skim coat of the cement.


FINAL STEP:


Once that layer has cured, you are free to place plants in your new sneaker planter.


Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Artsy Pretty Plants
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...
3 of 7 questions
  • Chrissy mcneill Chrissy mcneill on Oct 13, 2019

    So cute...but why don't you just take the insoles out? Then just drill the holes and stick a twig through to keep the holes open? Then I think the mold problem would be much less of an issue because you took out all the fabric insole and padding. Just a thought. And really cute idea!!!

  • Annette Annette on Oct 14, 2019

    These are too cute.

  • Deb Deb on Oct 16, 2019

    You are a very creative thinker.what a darling idea

Comments

Join the conversation

2 of 52 comments
  • Mary Russell Mary Russell on May 28, 2021

    Everyone can do their projecte however they desire.If you desire twige or dowels or whatever then by all means,go for it!Thats the thing about your project,you can do it your way,but when you put it on here,there will be someone to tell you how to do it better,Ha.

  • Doreen Kennedy Doreen Kennedy on May 29, 2021

    Very cute planters!

Your comment...
Next