Cute DIY Garden Path Idea!

Use your wood scraps to make an adorable garden pathway!
Looks like you just mix and match sections from the main trunk and the branches for a great look!
To make this last, give them a quick once over with weather proofing paint/liquid (like for fences) and sprinkle on some sand before it dries to keep the steps from getting too slippery! If you cut with a chain saw, the natural roughness will likely prevent the slippery problem.
Cutting them thicker (3-4 inches) will help prevent rot issues. Also they may float away during heavy rain :0 !
Note: if you are in an area with termites, simply buy a few blocks of candle wax, melt in a pot, then brush on to the bottom side (doubles as extra waterproofing!).
Also you can place cedar chips in the soil, and add baking soda to prevent weeds!
From http://www.growsonyou.com/photo/slideshow/106323-log-path-at-shrewsbury-flower-show/all
Mixing sizes is key to the complete look

Frequently asked questions

Have a question about this project?

  2 questions
  • Paul Cartmail Paul Cartmail on May 26, 2016
    How long are the stumps ? How are they secured ? What is used to fill the gaps between the logs?
  • Gail Gail on Sep 18, 2016
    How do you cut them? I tried this but workers had problems doing and making flat. Thanks, Gail

Comments

Join the conversation

2 of 6 comments
  • Carol Carol on Jul 30, 2014
    I LOVE this look! Thanks for all the information about preparing the wood slices to make them into stepping stones. Can you give some instructions on preparing the walkway before you place the "stones"? Are they simply placed in the dirt or is that mulch? How do you get them to sit so uniformly level?
  • Linda Linda on Sep 28, 2014
    The wood could be cut from your wood pile so not to many trees have to die
Next