Dragonfly

4 Materials
$3
1 Hour
Easy
Hi, I like to try and make things for around my house and garden using mainly old and scrap materials. This project was made from bits and pieces I had lying around my garage. I don’t throw away anything as I think it will always have a use in the future!
Have a look at the video above to watch how I made this Dragonfly or have a look at my guide below. The dragonfly part starts at 4 minutes and 33 seconds into the video. I used the leg of an old broken stool and some old copper for this one. I also used  a few copper nails and some white paint.
Firstly I sketched out a wing shapes onto the copper and cut them out using a tin snips.
I then flattened one corner of the stool leg using a block plane to form an area on which to nail the wings.
I decided to cut out some eyes for the dragon fly and left a tab on one end so I could nail through the wing and then through the tab to hold everything together.
I sanded the leg and gave it a coat of white exterior paint. I used white as I thought it would be a good contrast against the old copper which had developed a nice patina from being left out side for a number of years.
And that’s it the finished project! 

I attached a metal spike to the bottom so I could stick it into the ground but it could also be hung from a tree using some strong fishing line.
I attached a metal spike to the bottom so I could stick it into the ground but it could also be hung from a tree using some strong fishing line.

Suggested materials:

  • Wood
  • Copper
  • Copper nails
See all materials

Frequently asked questions

Have a question about this project?

  1 question
  • Bar21790163 Bar21790163 on Aug 17, 2017
    What kind of Sauter was used in melting the so Sauter my ring together

Comments

Join the conversation

4 of 38 comments
Next