Old Drawer Turned Into a Planter

9 Materials
3 Hours
Easy

Here's how I turned an old tatty drawer that had seen better days into a function and modern plant stand with shelf for free, using some spare pallet wood.


You can read my original DIY plant stand repurposed drawer blogpost here.

Note, this can be created using one drawer or several.

OK. So here's a single drawer that had a terrible paint job. And a heads up - all DIY project videos show a larger drawer, which I featured on an ITV TV show recently.


But, the idea is exactly the same.

Above, I'd cut two side panels to match. This is just one of them.


And the width of it works out at EXACTLY the same width (front to back) as the drawer.

I also drilled pocket holes and glued and screwed all the side frames together.

Now, I'm laying the side of the drawer on top of one of the pallet wood side frames I made.


I screwed from inside with 4 screws.

I also cut three slats, pocket holed and propped it up with clamped offcuts so I could screw it to either side of the frame.


This added more strength AND it became a useful shelf.

And finally, for my plants, I drilled 6mm holes in the drawer base for drainage holes before lining with a hessian sack and that was it!

I just love how this simple piece turned out.

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

The Carpenter's Daughter
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  2 questions
  • N. G. Londonderry N. G. Londonderry on Nov 01, 2020

    What was the Hessian sack used for...to trap moisture, or for appearance?

  • Em Em on Nov 01, 2020

    Unless you are just using a disgarded door from the trash why not just build a drawer and add a handle?

Comments

Join the conversation

 2 comments
Next