Faux Stained Glass Cabinet Technique
Grab some Elmer's glue and craft paint for this one of a kind cabinet update!
Check out the video for more how-to's!
I found this cabinet at a thrift store and it was a perfect size for our TV - but as you can see it didn’t hide the cords very well..
Instead of taking off the glass… I had an idea!
Next, clean the glass.
First, remove the doors from the cabinet.
After that, grab your white glue and add about a tablespoon of black paint to it and mix it.
Following that, print out a pattern and tape it to the glass, & begin tracing!
Continue to move around the pattern and trace until your glass is covered! Let it dry overnight.
Next, pour some clear glue and into a muffin tin for separation.
After your tints are mixed -- you're ready to go!
Next, add a few drops of paint to the glue to create a tint! Be sure not to add too much paint so it's a little bit transparent.
Begin coloring in your faux lead lines!
Add another coat if necessary. Let the glass dry overnight & reattach to your cabinet!
And that's it! I love the way this looks on the cabinet - it gives it a one of a kind whimsical look!
You can personalize colors and trace any patterns to fit your style!
You can use this technique on any kind of glass -- from old windows to glass doors-- the possibilites are endless!
I hope this inspires you to try out this faux stained glass technique!
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Fran Fowler on Feb 13, 2022
Tremendous idea!!!
-
-
Kristine Oh! on Feb 13, 2022
I use food coloring instead of paint for a completely clear color. It works GREAT. also, for a more permanent effect, use epoxy resin instead of glue.
-
Frequently asked questions
Have a question about this project?
Can you do this on windows too? Also does it give you privacy?
How do I scrape it off, after I have totally F--Ked up my cabinet glass?
I’m personally not a DIY’er … but I love this and I think I can do it …
… how is that getting onto the glass for you to have your separations … or is it a special type of paper ?