Can I stencil directly on a new white mailbox?
by
Bue8444656
+2
Do I have to do anything to a new mailbox before stenciling it?
5 answers
-
Wash it to get any grease, oil or wax that may be on it. It is important to get good adhesion of the stencil. The stencil area can be very lightly sanded with fine sandpaper or wiped with a de-glosser. Remember to keep the sandpaper or de-glosser in the stencil area only as it will dull the surface. As with any painting it's all about t he prep. Have fun with your project.
Toolpro
on Jul 13, 2016
-
I would use a green Scotch Bright pad just to light scuff the surface.
William
on Jul 13, 2016
-
thank you
Bue8444656
on Jul 13, 2016
-
I would start by thoroughly cleaning it and maybe using a de-glosser . Then I would go for it. I think it would help to put a coat or two of poly to protect your stencil design.
Janet
on Jul 13, 2016
-
I would try a tiny bit of the stencil paint on the bottom (before removing the gloss) and see if it adheres first (scratch test).
CrowEyes
on Jul 13, 2016
Sign Up to Answer
Related Discussions
Suggested Project Book
