Yes, Pam! Sand the old frame, not necessarily down to the bare metal. You just need to get loose paint, rough edges, and bubbles out. Then paint the frame with Rustoleum or a similar paint. If the glass is smooth on top, then paint the glass bottom with stained glass paint or Unicorn SPiT. Seal it with oil-based polyurethane sealer, spray type. Your table will look fresh, trendy and attractive. 😇
First, remove the glass if the glass is broken, spray paint the bottom with Rust-Oleum 2X paint with primer in desired color, then use pallet wood cut to fit the top, sand the wood, then paint/varnish/lacquer it to my desired color, then use clear Marine Spar Varnish to seal and protect it. Voila! A new table.
I found this in the curb this morning on my way to work. Needless to say I'm late :) does anyone know anything about this piece? What would you do with it? Paint? Res...
See more
Do you have any pictures as it is rather difficult to see what you see from here...............?
Yes, Pam! Sand the old frame, not necessarily down to the bare metal. You just need to get loose paint, rough edges, and bubbles out. Then paint the frame with Rustoleum or a similar paint. If the glass is smooth on top, then paint the glass bottom with stained glass paint or Unicorn SPiT. Seal it with oil-based polyurethane sealer, spray type. Your table will look fresh, trendy and attractive. 😇
First, remove the glass if the glass is broken, spray paint the bottom with Rust-Oleum 2X paint with primer in desired color, then use pallet wood cut to fit the top, sand the wood, then paint/varnish/lacquer it to my desired color, then use clear Marine Spar Varnish to seal and protect it. Voila! A new table.