How do I paint a cinder block bathroom wall?
+2
Related Discussions
Suggested Project Book
Hi Dodie, they make specific paint for concrete and block walls that breathes so it doesn't break off.
First you need to seal it with Drylock Waterproofing paint. Absorbs 1" to 2" into the concrete and block. It is white. Then you can paint with any color you choose. Use a thick nap roller about 1/2" nap.
https://www.youtube.com/watch?v=AOQM2XyMUco
Hell, hope this helps you out,
Paint the entire wall with a thin coat of a concrete sealer or concrete primer. Apply an even coat with a wide paintbrush. Allow it to dry for four hours or for the time indicated on the sealer label. Paint a thin coat of exterior latex masonry paint or exterior acrylic house paint onto the prepared cinder blocks.
Prime and then paint