How can I paint window trim without sanding?
Is there any way to paint window trim without having to sand? Hoping for a magical solution as I have 25 windows and 12 doorways ~sigh
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to match ceiling paint?
Can someone tell me how to match paint for a ceiling touch up job?I cut a small patch of dry wall paper out of the ceiling and had paint made at Home Depot TWICE! Sti... See more
How to stain wood deck?
Tips to stain my wood deck?
How to stain wood cabinets?
How do I stain my wood cabinets? Do I have to remove them and put them back, or can I stain them while they are attached?
I want to paint water based paint over oilbased paint without sanding?
I've bought Rock Grip Soft Velvet to paint 3 rooms and now I've noticed that it was previously painted with oil based paint. I don't have the energy to sanding the w... See more
Can I paint dark cabinets grey or should they be sanded first
can I just paint kitchen cabinets gray or should they be sanded first?
Can I paint a mahogany wood door white or black without looking bad?
It is in a very dark front-hall of a small bungalow. I propose to paint internal side of front door white & outside door black: Reasons, To give a little brightness... See more
Hi Kathleen,
I found this video that may help you:
https://youtu.be/Dygf5-s3EB0
Good luck!
if you are not looking to repair the wood surface of scratches, etc., use a good deglosser ( JASCO) - 'liquid sander' to wipe down the simi/glossy surfaces, no rinsing required. will give good 'tooth' to the surface to allow new paint to adhere properly
If they have a semi or glossy surface don't skip the sanding because your paint will peel off and you will have a much worse mesh to deal with. You don't need to completely sand off all the paint, just lightly create scuffs of minute lines with a very fine sandpaper or furniture grade steel wool. Sand in the direction of the wood grain with quick light strokes, just enough to give the new paint something to adhere to. (Wipe off any residue with a damp cloth before painting.)
Hey Kathleen I got same! Actually more. Best magic solution I found is called: Spray 9. If you leave it on long enough and use enough it will either
A. take it down to the primer.
B. Melt the paint smooth to extents you only need to sand a few areas.
After that, Wash it off with something good like: Dawn dish detergent or Ivory Soap, and you are ready to paint.
https://www.amazon.com/Spray-Nine-26801-Degreaser-Disinfectant/dp/B00BAKMTG2/ref=asc_df_B00BAKMTG2/?tag=hyprod-20&linkCode=df0&hvadid=198082398653&hvpos=1o2&hvnetw=g&hvrand=18437931297092257787&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9006918&hvtargid=pla-409767888204&psc=1