If scratches easily appeared, the surface may not have been sufficiently prepared/cured. Is this a wall, wood table, or otherwise? Your paint may not have been the best choice for that particular surface, or it requires additional coats. On a cabinet, it's always wise to poly coat for added protection. You'll never get the same finish that's achieved in a factory. You must also factor in room humidity levels and temperature when painting.
I don't think putting anything over it will adhere well. As others have suggested, you are probably having problems with paint adhering to a surface. Prep is truly the key. I would sand it, wipe it down, seal it and then paint. Good luck and stay safe!
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ...
See more
I don't want to sound like a total "hater", but am I the only one who doesn't like distressed furniture? I see so many beautiful pieces of furniture that would look o...
See more
Sounds like the paint isn’t sticking well. Painted paneling needs very careful prep - lots of sanding,
cleaning and priming. Unfortunately there’s not much you can do at this point. So sorry!
If scratches easily appeared, the surface may not have been sufficiently prepared/cured. Is this a wall, wood table, or otherwise? Your paint may not have been the best choice for that particular surface, or it requires additional coats. On a cabinet, it's always wise to poly coat for added protection. You'll never get the same finish that's achieved in a factory. You must also factor in room humidity levels and temperature when painting.
The magic is in the prepping, looks like you have a new project coming your way:
https://www.homedepot.com/c/ah/how-to-paint-paneling/9ba683603be9fa5395fab90111045acb
It may need a good sealer.
So your wife had you paint panels that were scratched and now they show thru the paint? Not sure exactly what you are asking?
Hello did you use a primer? Proper prep is essential for good results.
Your question doesn't make sense. re-read and re-post.
it be best to use a primer first.
Hi Jim, we'd love to help, but I'm a little unclear of what you're asking. Would you mind giving us more information please?
Jim
Are the panels on a countertop or cabinets? Also, it depends on the type paint you used. We need more info so we can help you. Thanks!
I don't think putting anything over it will adhere well. As others have suggested, you are probably having problems with paint adhering to a surface. Prep is truly the key. I would sand it, wipe it down, seal it and then paint. Good luck and stay safe!
Hi Jim, hope this helps you out, primer is important as panels are porous, https://www.youtube.com/watch?v=x1pD5EgdExQ