Removing popcorn on ceiling

+2
Answered
wanting to remove popcorn on the ceiling , what is the easiest way to do it and what to do with it when im done ?i dont want a smooth finish .thank you
  5 answers
  • Janet Kampfe Janet Kampfe on Feb 19, 2013
    An easy way to remove popcorn spray with less mess is to use a spray bottle or lawn sprayer and give it a quick swish with warm water, doesn't take much, let set for a few minutes them use a wide scraper or putty knife to scrape it off. Comes off in big chunks and not a lot of messy dust.

  • Prior to removal of any popcorn ceiling you need to know what the popcorn material is. Newer ceilings are styrofoam beads like you would find in a bean bag chair mixed with binders. However the older popcorn ceilings oftentimes were asbestos materials and can be hazardous to remove if not done professionally,. I would suggest wearing a mask, scrape about a four or five inch square of this off and into a plastic bag and send to lab. One such lab is Pro-Lab. Often times you can find their test kits in the larger box stores if not you can visit their web site for a kit and costs. Testing is very inexpensive and is worth your safety. http://www.prolabinc.com/asbestos-test-kits.asp Once you know it is safe if you do a search at the top of the site page on popcorn ceilings you will get a ton of advice on how to do this from many who have worked through this messy job.

  • Hamtil Construction LLC Hamtil Construction LLC on Feb 19, 2013
    Agreed! Get it tested. After that, we usually tarp everything and use a garden sprayer with hot water. Scraping it off is pretty easy at that point, so long as the ceiling was prepared correctly. For acoustical sprayed right on to raw drywall, that's a bit tricky.

  • Terry S Terry S on Feb 23, 2013
    thanks you guys i dont believe it is asbestos it was done in 1996. i am going to try the water spray because it is really dusty and messy. kevin would love to see what you were describing but the site is for furniture?try again?thanks again .

  • KMS Woodworks KMS Woodworks on Feb 24, 2013
    @Terry S oops...I fixed the link. Cutting and pasting with low caffeine.