Wicker aka pvc outdoor furniture
How to rescue my Wicker aka pvc outdoor furniture. It is brittle and breaking.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I remove these water marks from wood tables?
My husband bought these tables and a few of them are in good condition while some have like water marks on them (not sure though). I would like to know what could I ... See more
Cat scratch pulls on a couch
I have an ivory, jacqaurd fabric couch. I recently rescued two young cats and one has claws. I came home one day to find she scratched the front of the arms. They had... See more
Sadly, one it is has gotten brittle it is most likely not salvagable. You could try bringing back to life with Armorall.
here is some info for you
https://www.youtube.com/watch?v=WIH-OlU5bb8
Here's a link with some repair ideas for you:
https://suggesthow.com/how-to-repair-plastic-wicker-furniture/
Easy 3-Step DIY Tutorial On How To Repair A Wicker Chair
https://krostrade.com/blog/how-to-repair-a-wicker-chair/
Although genuine wicker is Not the same material as resin look-alike wicker, damaged areas can be repaired using similar weaving techniques.
I would suggest repairing the damaged areas by weaving in narrow nylon webbing. Cut off the sharpest pieces of the damaged or loose resin plastic first (easier if you use a quality brand name scissors such as the Fiskars plastic cutters shown below).
Thread the nylon webbing through a large blunt bodkin, and 'sew' over and under the existing partial pieces to cover the area. This is not difficult but will take time and some patience. Pull through so that the webbing is tight, ensuring that each section is lying flat before you go next either under or over.
Nylon webbing is available in different widths, in a myriad of colors and is very durable. For use in repairing resin patio furniture, I would say that 1/2 inch would likely be most applicable.
Do not use the cotton/ polyester webbing as it is not water resistant and does not dry quickly; so is unsuitable for outdoor use. Webbing is most cost-efficient when purchased in larger bulk lengths.
https://www.strapworks.com/shop-by-product-type/webbing/nylon/flat-nylon
Thank you!
You will need to try and soak it with water and a little dish soap. (Dishsoap help it sink in). Ooh! Plastic!! You will need to replace it. Try the craft shop for supplies.
Maybe this will help: https://www.hunker.com/13404035/do-it-yourself-wicker-chair-repair
You might be able to paint your furniture to give it another year or two! The paint may help make it less brittle.
If the frame itself is still in good stable condition, then I would repair broken or brittle seating areas with the weaving tips above. The other thing you could do is spray the entire set and place thin plywood on areas where people sit with cushions over it. Again, this is only providing that the structure is sturdy.
Re: Homeroad's suggestion to paint: While painting the furniture may possibly help prevent the wicker from becoming more brittle, it will not rescue the sections that are already breaking or repair them.