Broken china tier
-
OnBlissStreet on Feb 18, 2015This is just off the cuff, but I wonder if you could use that plumbers epoxy putty that you use to fix holes in porcelain sinks. Totally worth a try because that is just beautiful!Helpful Reply
-
-
Rick on Feb 18, 2015Also use a brass washer at the base of each plate. Will prevent chippingHelpful Reply
-
-
K on Feb 18, 2015what about a washer...with the putty it might make it stronger ...just a thoughtHelpful Reply
-
-
Swan Road Designs on Feb 18, 2015How about trying clear E6000 adhesive? It darn near holds anything.Helpful Reply
-
-
Judy Capone Mantell on Feb 19, 2015Google "decorative metal washers and you will find a lot of quite pretty ones that would also cover the damage and add more support. They can be painted to match the plate also.Helpful Reply
-
-
Elizabeth Wright on Feb 19, 2015NOt a metal washer!! Use a plastic or rubber one!Helpful Reply
- See 2 previous
-
-
Judy Capone Mantell on Feb 20, 2015Elizabeth is right. A metal washer may put too much pressure and crack it further. But you can use a rubber the under a decorative metal one and get the best of both worlds!Helpful Reply
-
-
Karen Payne on Feb 21, 2015If I were going to use glue, I would use a product called Amazing Marine Goop. It is made to withstand water and sun ... I do yard art and this is what I use. I have used E6000 but it wasn't as strong in the long run.Helpful Reply
-
-
Judy Capone Mantell on Feb 22, 2015I don't know why I did not think of this before, but instead of a rubber washer you could use a thick bead of that silicon or silicon-rubber caulk for around the sink. It would also be a perfect fit and you could make it as thick or thin as you need. You could probably press the metal washer into it and let it dry, then cover with a decorative one. The stuff comes in clear and in white.Helpful Reply
-
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How to restore an old cast iron wood burning stove?
The story of this stove started in a small town in Mexico. It was in my mother's family and was used to cook on and heat the kitchen when she was a kid. When the home... See more
Help! I don't think my HE Kenmore washing machine is really washing!
I have read the manual, yet when I put a load in,they end up in a bundle ...especially sheets..everything is bundled inside,how can clothes get clean like this,with n... See more