How to fix a wine fridge door that is not closing properly?
The closed door leaves a gap at the top.
Suggested Project Book
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to trap fruit flies?
Does anyone know how to get rid of fruit flies with a homemade trap?
How to remove popcorn ceiling with vacuum?
Is there a way to use a vacuum to remove a popcorn ceiling?
How to fix a crack in a door frame?
How to fix a door frame with a split in it?
How to restore an old cast iron wood burning stove?
The story of this stove started in a small town in Mexico. It was in my mother's family and was used to cook on and heat the kitchen when she was a kid. When the home... See more
Help! I don't think my HE Kenmore washing machine is really washing!
I have read the manual, yet when I put a load in,they end up in a bundle ...especially sheets..everything is bundled inside,how can clothes get clean like this,with n... See more
Loosen screws or bolts on hinges, close the door, then tighten the screws back down
Check the hinges to make sure they are fastened tightly.
I am sure you could fit a rubber gasket on the inside of the door like you would have to do on a fridge to keep it closed. Just cut the gasket rubber to fit and glue it down.
You could put a strip of Velcro with adhesive backing to the body and door to help keep it closed. I have done this on an old freezer and it works great.
How old is the unit? Has to be a hinges are loose from opening/closing the door. Are they aligned? Are the screws loose? Also is rubber gasket seal broken/cracked? Those would be the only two issues I could suggest.
It is either the hinges or the gasket. Check and see if the hinges are peoperly aligned and tight, inspect the gasket and see if it flexible. Other than that you could attach velcro to make sure it seals.
Contact the manufacturer for their advice.