Screw-heads are worn unable to remove??

q screw heads are worn unable to remove
  6 answers
  • Dfm Dfm on Jun 07, 2017
    piece of rubber ie jar lid gripper and pliers to turn screw. if you have a drill, a bit for metal a tich larger than the scew and drill it out.

  • William William on Jun 07, 2017
    Use a rubber band over the tip of the screwdriver and push it into the screw head while unscrewing. Otherwise use a pair of pliers.

  • Nga24873078 Nga24873078 on Jun 07, 2017
    Awesome thankyou will try that

  • Marlene June Haas Marlene June Haas on Jun 07, 2017
    Cut off the remaining screw as close to the bottom as you can. Then take a drill and grind out the remaining part. When you get all of the old screw out, you will need to use a slightly larger screw to replace it.

  • Janice Janice on Jun 07, 2017
    Try putting steel wool over the end of your screw driver before inserting the screwdriver into the screw

  • Karen B. Karen B. on Jun 08, 2017
    good ideas