How to Install a Light Without Wiring

2 Materials
$40
1 Hour
Medium

Have you ever found a light fixture on clearance, at a yard sale, or while thrifting, but you didn’t buy it because you didn’t want to mess with wiring it? Well, for accent lighting, you don’t have to hard wire! Just follow these easy steps on How to Install a Light Without Wiring!

*This technique is best for accent lighting only-bedside lights, a spot light for art, or a light that is mostly for decorative purposes. The tap lights used will not put off enough light to light a room.

What You Need:

This post contains affiliate links.

~ Round junction box that will fit inside the base of the light fixture

~Light fixture

~Wire cutters

~Drill and drill bit

~Screws

~ Tap light

~Strong glue, like Gorilla glue, Superglue, or hot glue


Step 1-

Clip off the wiring from the light fixture with wire cutters, or bind them up so that they are not in the way of the fixture mounting flushly.


Step 2-

Dry fit the junction box inside the base of the fixture to be sure that it will fit. If there are already holes in the base of the fixture, check to see that they will line up with holes in the junction box. If not, drill into the base of the fixture where holes will be needed.


Step 3-

Mount the junction box on the wall, paying careful attention to which direction it needs to go in order to match up with the screw holes in the base of the light fixture.


Step 4-

Glue the base of the tap light into the fixture wherever it will stick securely. Make sure when gluing that you will still able to unscrew the tap light to change batteries.

Step 5-

Line up the screw holes in the electric plate and the base of the light fixture, and screw into place.

That’s it! That’s all there is to install a light without wiring!

Set of 5 lights with remote
Set of two lights without remote

Do you want to see another project my hubby did for me?

Please follow and like us!

Danielle
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 4 questions
  • LT LT on Feb 20, 2021

    Just a question....the lights would be perfect for pantry shelves or a storage cabinet. Could I mount the remote on the outside of the cabinet and the use it to turn on the lights inside the cabinet? Thank you for the wonderful project and a new idea. 😉

  • Kathy Kathy on Feb 22, 2021

    Could u do this for pendant lights?

  • Dione Dione on Mar 17, 2021

    What brand of puck lights are you using, the pack with remote, because I have had the same problem as Kevin and Em. Thank you kindly for your time.

Comments

Join the conversation

4 of 18 comments
  • Em Em on Feb 20, 2021

    Good luck with the puck lights. I bought a set for myself, thought they were cool and then got one for my sister. Both sets burned out in no time and it isn't the batteries. They all just quite. Two full sets of 6 each and they aren't cheap.

    • Kevin Kevin on Feb 21, 2021

      You said it battery puck lights are for the birds waste of money

  • Tonya Tonya on Mar 17, 2021

    Great idea!

Next