How do I tighten the spindles on my rocker?
I have a rocker / glider chair but over the years, the spindles on the arms and sides have worked themselves loose. Do I deconstruct these parts and re glue and rescrew or is there a better way ? Thanks
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I keep my wooden rockers from rotting?
My new rocking chairs frequently sit in small amounts of water when it rains or the plants are watered. Any ideas about how to elevate the bottom of the rockers to k... See more
How do I tighten the slats on my plantation shutters?
One of the shutters in our house has loose slats -- they won't stay open. (I have the same problem with one of the AC vents in my car.) is there a way to adjust them ... See more
wood glue and flat toothpicks work great! push down into the gaps then when the glue has dried, cut the excess toothpick off with an exacto knife. you may have to use several on each spindle - touch up with a little stain on a q-tip!
If you can actually see a space where the spindles have worn the area, I would just add glue to that, otherwise you might have to pull the pieces apart, glue and reassemble.
Yes you would have to take apart to do it the Wright way and use gorilla wood glue sold at Home Depot works great