Is it possible to change this faucet without removing the tiles?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
I have ruined my copper sink! Please help!
I'm hoping to save my copper sink, but I am afraid I have totally ruined it. I need some suggestions on how to save it! What can I spray it with, or where can I fin... See more
Black stuff in home water supply.
This black oily or paraffin type stuff sometimes comes through my hot water line in the second story. Have talked to the water company. They say it isn't them or th... See more
Unless the front of the tub has some hind of removabte panel I'm afraid you will need to remove those tiles and replace when you are done. Hopefully you have extra tiles
Your plumber should be able to easily replace that faucet without damaging your tiles because the faucet is mounted onto the tub surface...not through the tiles. He would simply remove the old faucet and install the new one....never touching the tiles at all. This is assuming you want the new faucet mounted in the same place as the old faucet.
There should be a way to get to the faucet and the plumbing. I know our coat closet in the living room butts up to the end of the tub area in the bathroom and the opening is in the side of the closet. This is so you don't have to remove parts of the walls or tiles to get to it in case you need to replace or repair pipes or hardware.
Yes it's true that the faucet is not on the tile, but I think her question refers to whether the faucet needs to be accessed from underneath, which would mean breaking through the tile. Some faucets can only be worked on from underneath.
Do you have a closet behind the tub, or as a last resort a drywalled wall? It may be easier to cut out the drywall, than re-tile. We had to do that to access our pump. We simply put a register over the hole.
I found a forum that addresses your question. Maybe it will help. If you know the model of faucet, that may give you the answer as well.
http://www.diychatroom.com/f7/how-do-i-remove-roman-tub-spout-136247/
Yes cutting a hole through the drywall in the room that backs up to this. If it is a closet, just put a piece of painted quarter inch hardboard over the hole. If it is a real visible place like bedroom, then hire a drywaller to refinish it, if you aren't that handy. Not much effort at all.