What do I do about my doors not lining up?

Linda
by Linda

Hello everyone I want to thank everyone who has been answering my dilemma questions for my cabinets, but I’m near the end of the cabinets. Thank God!So here is my new dilemma. I almost done getting the all the doors on and BAM! Another problem. The doors aren’t lining up. Yes they are the correct doors and no they are not upside down. I have moved the hinges, I have moved the screws on the cabinet doors and still no success. I’m attaching pictures. Thank you everyone in advance for your help!

  8 answers
  • Lynn Sorrell Lynn Sorrell on Mar 30, 2019

    do you mean you think they should be even at bottom with the cupboard?

  • William William on Mar 30, 2019

    The hinges have oval holes so the doors can be adjusted. The frame adjustment allows the doors to go up and down. The door adjustment allows the doors to go in and out.

  • Kelli L. Milligan Kelli L. Milligan on Mar 30, 2019

    I'm at a loss too. But your cabinets look great.

  • Check the hinges! Sometimes you can alter the hinges to make them line up

  • Loosen the screw slighting where it's attached to the cabinet base and adjust the door to the height that you need, then screw it back in.

  • Jojo Jojo on Mar 31, 2019

    Yup! CribbsStyle's got it! That's the screw that needs adjusting. Don't despair...you got this ;-) Notice how there is like a slot....that allows you to make the adjustment without removing this screw....you can adjust either by going up or down...whatever is necessary to align the doors. Then tighten and you're good to go! See, knew you could do it !! ;-)

  • Em Em on Mar 31, 2019

    The slot on the cabinet is for raising or lowering the door. The slot on the door is in the opposite direction to close the gap where the door meets the cabinet so you can adjust either. Loosen the screws slightly shift the door to the direction then tighten.

  • Saylor Saylor on Apr 04, 2019

    Can I ask a question - My cabinets don't line up at the top! Would I go about fixing that the same way?