How do i get the bifold doors back in the top groove.

+3
Answered
  6 answers
  • Sharyn Curry-Ludlow Sharyn Curry-Ludlow on Dec 15, 2017
    Push the pegs at the top of the doors down (they're spring loaded) Then push the door back under the groove and allow the peg to pop into the groove.

  • Holly Kinchlea-Brown Holly Kinchlea-Brown on Dec 15, 2017
    There should be a little button type pin that you push down until you can line up the door with the track, then release it into the groove

  • Vimarhonor Vimarhonor on Dec 15, 2017


    Here’s a PDF with schematics. You made me need to just your pivot pin. There are spare parts available for purchase at your local big box hardware if anything is broken.

  • Lah Lah on Dec 15, 2017
    On some doors, you push down the pin intil it lines up with a plastic slider. Then, take and push/snap the pin into the slider and you should be good to go unless the slider broke. Then, the slider needs to be replaced.

  • Paula Paula on Dec 18, 2017
    doors that do not have pins to push down, you close up the doors so that they are folded, insert the bottom into track at an angle then tip the top into the track until it is straight up and down vertically.

  • William William on Dec 18, 2017
    The rollers on the top are spring loaded. Just line up the door with the track, push down on the roller, and slip the roller into the track. DONE!