What is the best way to get a glass slider lubricated so it slides?

  6 answers
  • WD40. First clean - vacuum, then wipe out with an old rag doused in rubbing alcohol. Then spray the WD40.

  • Valerie Valerie on Jun 07, 2017
    I run my tracks with a bar of doap

  • William William on Jun 07, 2017
    I agree with Naomie! Silicone spray would also work but I go for WD40.

  • Sbo13094502 Sbo13094502 on Jun 07, 2017
    The worse product you can use is WD-40. It will only build up on the rollers and slow the door down even more. It may take a few months but the end result is you have to replace the rollers because they are completely clogged up. Try to keep the runner clean.

  • Mary Mary on Jun 07, 2017
    Clean the groove it runs in really good then lubricate with liquid graphite

  • Nancy Craigmiles Nancy Craigmiles on Jun 07, 2017
    Be sure to clean as much gunk and roughness away as possible. I would use some steel wool or even a brillo pad and rinse and dry thoroughly. Then run a bar of soap back and forth on the tracks several times. If this doesn't work. check the wheels on the bottom of the door. This could be part of the problem.