We felt the same way Bec, so we asked at our local home improvement store. Fortunately for us they had sheets that LOOK like tiles. They come in light weight metal sheets in the colors of tin, copper, or brass. They were stick and peel. Getting the wall thoroughly clean was harder than installing them and they were so 3 dimensional they looked like tiles!
So do you normally install the backsplash tile flush with the end of the countertop or flush with the outside edge/end of the upper cabinetry? My countertop is not ve...
See more
I am going to install 3x6 glass subway tiles for a kitchen backsplash. This style design has uneven, "wavy" edges all around … so how do you use spacers w/this styl...
See more
Because we do not have the time nor inclination to rip off the tile from the wall, how do we best cover an ugly glass mosaic tile backsplash in our kitchen? Textured ...
See more
Just got new countertops installed to find out my wall that the backsplash will be installed is is wavy, is it easier to use mud and build up the wall or use the back...
See more
I hate my kitchen backsplash. I thought I would do a simple white subway tile but it doesn't seem to really match the granite. I don't want anything too trendy. Do yo...
See more
The old tile was removed and left very uneven with old netting and stuff still stuck on wall when new cabinets were installed.Is there a kind of hard board or a produ...
See more
The best job all comes down to prep and planing maybe go to Home Depot to get help
Bec, tile is more about attention to detail than coordination. Plan ahead, measure and mark lines and use spacers. You'll do fine! 👍
This is pretty simple to do.
https://www.hgtv.com/remodel/kitchen-remodel/self-adhesive-backsplash-tiles
Hi Becky, You can find kits at Home Depot or Lowe's, that you just peel and stick, it's easy
We felt the same way Bec, so we asked at our local home improvement store. Fortunately for us they had sheets that LOOK like tiles. They come in light weight metal sheets in the colors of tin, copper, or brass. They were stick and peel. Getting the wall thoroughly clean was harder than installing them and they were so 3 dimensional they looked like tiles!