How do I regrout a shower stall?
by
Jane
+14
I need to regrout certain areas of shower stall...not entire area.
Suggested Project Book
Mix to a thick consistency and push into the joints with the spatula. Wipe clean with sponge, rinsing residue as you go. Grout haze must be removed in the first 4 hours.
https://www.hometalk.com/search/posts?filter=Grout%20in%20Tile
https://www.tilecleaning.org/how-to-regrout-shower.htm
check that pin https://www.pinterest.com/pin/467741111299737942/
You can get a small hand tool called a grout saw that will remove the old grout from the tiles. They run about $10 and can be found in the tile department of any home improvement store.
Jane...Remove the old and then apply the new.
You’ll have to remove the old grout and replace it with new matching grout. It’s not necessarily complicated, just messy and will take a bit of time.
Hello Jane,
First remove old grout using Dremel drill. Then use Waterproof Grout and re-fill gaps as instructions. Clean off excess grout and don't let it remain on the tiles as it will dry hard and spoil your work! Best wishes.