Cut off the bottom and seal with iron or on top electric ring of cooker. Cut off top of bottle neck is too narrow and seal in the same way. Buy and fix Water Downpipe clips to a wall or cupboard and push into them the soda container. Stuff with poly bags one at a time into upside down bottle and retrieve from neck end. Hope that's what you were after.
Use a gallon milk jug instead. Many already have a round indentation in them. Cut that out with a sharp scissors and trim so there are no sharp plastic edges. Stuff the bags in the hole ALWAYS starting with the bottom of the bag to force out the air. You can get about 50 in the gallon milk jug and it has a convenient handle on it. I keep one in the bathroom under the sink and one in the kitchen.
Take the 2 Ltr bottle and cut the bottom off at the very end and then make two holes on eather side to put a string to hang put bags in the top and pull out the spout
We have accumulated three or four years worth of Amazon gift bags but prefer using regular gift wrap for other purchases. Does anyone have ideas to recycle all of th...
See more
I do embroidery for a living and I collect all these empty thread spools (I do a lot of embroidery!!!!). The only thing is I don't know what to do with them. I did ...
See more
I buy wine online by the case and wonder what can made out of those molded protective trays that holds and secures the wine bottles in the container. They are so nic...
See more
I have several plastic lids from spray paint and aerosol cans that I want to do some sort of mid century modern wall/art piece. Or perhaps a mid century decor item bu...
See more
This might be what you are looking for Ann
https://www.hometalk.com/diy/organize/storage-ideas/plastic-bag-dispenser-from-a-soda-bottle-cd-15794959
Plastic Bag Dispenser From a Soda Bottle & CD
Here's a videos
https://www.youtube.com/watch?v=DfahlT7F7Zk
https://www.youtube.com/watch?v=L2Ea_kB3oVU
https://www.youtube.com/watch?v=iVIxwhSgViQ
Hi Ann, I hope this is the one you are looking for,
https://www.youtube.com/watch?v=L2Ea_kB3oVU
Here's a post that might help you - https://lifehacker.com/organize-and-dispense-plastic-bags-with-a-2-liter-bottl-508358311
Hi Ann,
Cut off the bottom and seal with iron or on top electric ring of cooker. Cut off top of bottle neck is too narrow and seal in the same way. Buy and fix Water Downpipe clips to a wall or cupboard and push into them the soda container. Stuff with poly bags one at a time into upside down bottle and retrieve from neck end. Hope that's what you were after.
I found this video on YouTube, it looks pretty easy: https://www.youtube.com/watch?v=KNH2U2HFBVc
Use a gallon milk jug instead. Many already have a round indentation in them. Cut that out with a sharp scissors and trim so there are no sharp plastic edges. Stuff the bags in the hole ALWAYS starting with the bottom of the bag to force out the air. You can get about 50 in the gallon milk jug and it has a convenient handle on it. I keep one in the bathroom under the sink and one in the kitchen.
I use an empty Kleenex box to store my bags - http://www.luckyhometoday.com/plastic-bag-storage/
Take the 2 Ltr bottle and cut the bottom off at the very end and then make two holes on eather side to put a string to hang put bags in the top and pull out the spout
Just in case you want another alternative, I created this one for myself - https://chascrazycreations.com/trash-bag-storage-dispenser-container/
Here is an idea from Pinterest https://www.pinterest.com/pin/211880357456232108/