Image Transfer Silhouette Knobs - Tutorial

I took some plain wooden knobs and jazzed them up with some cute Silhouette Boys & Girls! I used a new product called Mod Podge Transfer Medium. You can download the printable on my blog! http://graphicsfairymylife.blogspot.com/2013/02/make-sihouette-knobs-with-mod-podge.html
These are the knobs I created, I think they would be fun to use on a Child's Coat Rack or a Dresser!
Step 1 - Print the printable and cut out the images.
This is the product that I used. It's Mod Podge Transfer Medium.
Step 2: Apply a thick coat of Mod Podge to the cut out image. About 1/16" thick.
Step 3: Put the wet image face down, onto the knob, and pat, until it adheres nicely. Then allow to dry for 24 Hours.
Step 4: After 24 hrs, wet with a sponge and let it sit for about 2 mins.
Step 5: Using a damp sponge, rub lightly in a circular motion to remove the paper. When done, you can seal it, if desired.
Karen - The Graphics Fairy
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
2 of 25 comments
Next