DIY A Non-Traditional Valentine - Make a Gift-Wrapping Paper Heart

Easy
Thinking of a different approach to the more traditional colors of Valentines? Forget the reds and pinks! Surprise yourself and make something new and refreshing that will still provide the loving and enticing atmosphere of Valentine's Day! Think metallics! You can make a big impact by using recycle/upcycle materials like gift wrapping paper in bold metallic colors - that's sure to add a variety of texture and uniqueness to your valentine decorating skills! And this heart is so easy to make, you probably already have the materials on hand. Metallic gift wrapping paper - 13ft Thick wire (craft 12 gauge aluminum) or a wire coat hanger Wire cutter Scissors Skewer stick Tacky glue Clamp
Begin by cutting off enough wire for the size of heart you want (14"x12") bringing the ends together, curving the wire into a heart shape.
To make the tubes (about 50 for this size), I cut 3" strips of 27.5" wide gift paper and placed a skewer stick on the corner edge of paper at an angle. Then wrapped the end tip of the paper over the skewer and started rolling the paper with fingers pressed down on the table first. Once you've started rolling the paper, lift up the tube so your left fingers are controlling the roll while your right hand is rolling the stick and tightening the tube. Just before finishing the roll, add tacky glue to the corner end tip and continue rolling until reaching the end to seal.
Temporarily straighten the heart shaped wire into a "V" to insert two tubes on either side . . .
then re-shape into a heart. Glue the ends together at the center curve, and then glue on another tube, as pictured.
Begin wrapping the tube around the heart . . .
adding on additional tubes by dipping end into a little glue and inserting into the wrapping tube to make it continuous. You can clamp the tubes together while waiting for the glue to dry and continue wrapping.
As you're wrapping the tubes around the heart go back and forth - and not in the same direction - until you're satisfied with the look and size. The end of the last wrapped tube can be glued and inserted down among the other tubes.
Valentine's Day decor can be as unique and non-traditional as you want it to be. Just be sure to create it lovingly! Isn't that what makes it so special?
Gail@Purple Hues and Me
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
2 of 15 comments
  • Rebecca Lynn Gibson Rebecca Lynn Gibson on Mar 10, 2016
    As a kid in school, we used a similar technique to make "beads" from magazine strips. we then strung them together for necklaces as a mother's day present.
  • Mcgypsy9 Mcgypsy9 on May 06, 2016
    Oh I really love this! So different and so cool! Thanks for sharing!
Next