How to Condition Wood Furniture Instead of Having to Refinish It - DIY

I paint furniture but I have to admit I'm a purist when it comes to true antique pieces. I can't seem to bring myself to paint them and most of the time I don't even want to strip and stain them. I like patina on wood and that only comes with age and years of use. I love the story it tells. The dents, dings, and scratches. The wear and tear. All of those are part of the story. Last year we bought 4 pieces of late 1800s furniture. Every piece was faded and had its own share of scratches and dings. I knew I didn't want to lose the patina, so I researched until I found a solution I could live with.
Here is a close up of one of the tables. It had the most sun damage.
This is a before picture of my late 1800s lamp tables. You can see the darker area where the lamp sat was protected from sunlight.
I used a restoring product that is similar to stain. It comes in a variety of colors and you should choose the color that best matches the existing finish. Apply it and then wipe off 2-3 minutes later. It covers sun fade, water marks, white rings, and many other things. This is what the top looked like immediately after wiping off the restoring product. The directions say to wait 30 minutes before moving onto the next step.
I waited 30 minutes then applied a gel-based citrus wood conditioner and allowed it to sit for 20 minutes or so before wiping off the excess and then buffing with a clean rag. The darker area remained which I knew would, but faded area blended much better!
Love the luster! I used these products on these tables in February 2015 (a full year ago) and the finish held up well for 10 months or so. I probably should have used the wood conditioner again every few months, but life was busy and I never got around to it.
A champagne bucket hides the darker area where the lamp had sat before. For more pictures and product information visit: http://www.thetatteredrabbit.com/how-to-condition-wood/
Frequently asked questions
Have a question about this project?
3 of 13 questions
  • Mary Jo Mary Jo on Jun 21, 2021

    Ummm, I have looked several times but I can’t find a description of the products you used. Could you please post the names? Beautiful job, thanks for sharing!

  • Ticia Ticia on Jan 08, 2022

    I'm inquiring again as to what specific products you used. I've purchased a couple of things that said they would 'restore' but they don't really work. I've a chair, a table and a hope chest that need some help and I'd like to do it as simply as possible. If you have a product that you can simply wipe on and then wipe off that works, I'd really like to know what it is. Thank you.

  • Lesa Lesa on Sep 17, 2022

    I’m sorry if you answered with the product you used, if you don’t care what did you use?

Comments
Join the conversation
2 of 35 comments
  • JR Pablo JR Pablo on Mar 23, 2022

    I’ve seen Restore a Finish. Haven’t tried it yet. Maybe that’s it. Sometimes it’s even at TJMaxx.

  • Noni Noni on Sep 07, 2022

    Yes, a local antiques dealer uses Howard Restor-a-Finish (walnut color) and that's what i purchased and use now on my walnut/mixed woods antique bed and dresser. I have not ever used anything as an additional finish after this product, but after reading this article/post, will look into the citrus gel.

Next