Prevent door bottoms from rotting or rusting by installing a drip edge.

Peace Painting Co., Inc.
by Peace Painting Co., Inc.
A standard door bottom drip edge can easily be cut and attached to the bottom of a door, blending in after caulking and painting. Most exposed doors rot or rust from the bottom because the bottom edge cannot be protected. The drip edge keeps the water from curling under the door, instead allowing it to drip onto the threshold.
The new drip edge primed, installed and caulked to the door. Like most exposed metal doors, rust was beginning to form on the face from the bottom.
After painting, the drip edge looks like part of the door.
Frequently asked questions
Have a question about this project?
  1 question
Comments
Join the conversation
2 of 6 comments
  • Peace Painting Co., Inc. Peace Painting Co., Inc. on Jun 09, 2012
    Thanks Becky. To repair a rusty door, sand the loose rust off, clean and spot prime the rusty area with a rustoleum type primer. If there are rusty holes, apply Bondo paste after the primer, then sand and prime the Bondo. To paint, go to a good paint store and purchase acrylic metal paint and apply it in the cool of the day with a good brush. Best, Charles
  • Jean M Jean M on Jun 10, 2012
    thank you Peace :)....when it stops raining I'll do that :)
Next