DIY Hanging Planter

The Cofran Home
by The Cofran Home
4 Materials
This super simple project transformed boring, frumpy plastic hanging planters (that I picked up for $3 each at my local hardware store) into hanging planters that are more my style! The whole project only took a couple hours – and I’m in love with how they turned out!
I started with these super basic, not particularly attractive plastic hanging planters.
I removed the plastic hangers (they were just clipped on to the pot), and spray painted the pots white.
Then, I took a piece of twine and cut it to twice the length that I wanted my plant to hang. I folded the piece of twine in half and inserted the two ends upwards into the holes in the pot that were from the plastic hangers (that I removed earlier). I cut three more pieces of twine and did the same thing on the remaining holes.
Once I was done pulling the twine through the holes, I gathered all the ends at the top, and tied them together with an overhand knot.
I put in faux ferns from Afloral. I ended up putting 4 fern bushes in each planter, and it worked out perfectly!
I hung the planters in my screened in porch, and I just love them!
This DIY was the last finishing touch I wanted to put in my screened-in porch to complete my makeover for the room! You can see the whole "Screened Porch Makeover" here!
The Cofran Home
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 10 questions
  • Justine Justine on Aug 02, 2018

    How do you hang a planter? I don't want to have to drill into the ceiling.

  • NY-Helene NY-Helene on May 19, 2020

    Drainage?

  • Sus68509603 Sus68509603 on Jul 19, 2022

    Hi. Would it help to use a little sand paper rough plastic up a little, wondering if paint would hold better in weather. I'm loving this idea thank you

Comments
Join the conversation
2 of 105 comments
Next