Lanterns Made From Frames

13 Materials
$20
2 Hours
Easy

Here's a project that is inexpensive, yet looks nice and can be used for any season, or just to have as part of your home decor. What's even better is that you're turning something as mundane as Dollar Tree frames into useful lanterns! Candle lovers, this one is for you! :)


We want to help you DIY, so some of the materials in this post are linked to sellers. Just so you know, Hometalk may collect a small share of sales from the links on this page.

SUPPLIES:


OPTIONAL SUPPLIES IF YOU WANT TO MAKE LIDS: *Note: the lids are not functional, they are just for esthetics.

STEP 1: Prep & Paint frames First, I removed the backing and the glass of all of my frames. I used an old butterknife I keep with my art supplies to push the tabs completely back.





Then I laid my frames out and sprayed them with paint...

...you'll want to let the fronts dry completely, then flip them over and spray the backs. Make sure to get the sides as well!

STEP 2: Secure glass in frames & assemble lantern Next, I used hot glue to put a small drop of hot glue on the inside corners of the frame, then laid the glass down so that it wouldn't fall out when the frames were sitting up. *Note: I had my glue gun on for too long which is why my glue looks yellow.

Once the glass in all of my frames was glued and secured, I assembled my two lanterns. I applied a strip of hot glue to the long edge of each side, sat them up vertically and held them together, tightly, until the glue set.

STEP 3: Trace, cut & glue foam board bottom After my lanterns were assembled, I sat each of them on my foam board and traced around the bottom of the lanterns.

Then, I cut the foam board bottoms out, along my traced outline, with a box cutter.

Here are my foam board bottoms.

After I cut out the bottoms, I applied hot glue to the edges and sat the lanterns on top.

STEP 4: Trace & cut common board for lids (optional) If you want a lids for your lanterns, you'll want to follow this step as well as the next. Much like I did for my foam board bottoms, I also sad my lanterns on a piece of common board and traced around the edge. Then, I cut the marks with a chop saw, lightly sanded the cut boards, and applied Danish oil to them.

STEP 5: Add rope to lids Next, I hammered a nail into some rope on two sides of my lids to create a rope handle.

STEP 6: Finish knobs and install Finally, I applied Danish oil onto my two knobs and installed them into the middle of my lids.

Even though the lids are just for looks, I love how these little lanterns came out! They're perfect for any occasion and all year round.

DIY home decor using old picture frames

 

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 21 questions
  • Brian Spencer Brian Spencer on Nov 30, 2019

    Does the heat of the candles loosen up the hot glue?

  • Debbie Cochener Debbie Cochener on Jun 26, 2021

    Super cute idea, but did you use non flammable foam board? According to google, foam board is highly flammable.

  • Tee Tee on Jun 27, 2021

    Amazon will cut your wood? Or was that meant to read “home depot?”

Comments
Join the conversation
3 of 327 comments
  • Margaret Margaret on Dec 09, 2021

    I like the lantern idea. A great family project for the season and a great show of economics which this country is in great need of.

  • Fai80569285 Fai80569285 on Apr 30, 2023


    I think the lid would fit the lantern better if you placed a smaller piece of wood (about 1/4 inch thick) on the underside of the lid . This way the lid won't slide off when moving it. Just a thought1

Next