Turn Your Soda Cans in Winter Decor

7 Materials
2 Hours
Easy
I wanted a metal wreath for winter. They are expensive! While thinking about how to make one, I finished a soda pop. Then I was inspired to try something. I started washing out and saving a few cans. Seventeen cans.
The project was easier than I expected! Plus I had everything on hand.
I started with washed out soda cans. Using my crafting scissors, I removed the tops and bottoms of the cans. Then to make the "sheet" of metal lay flat, I rubbed it along the edge of the kitchen counter.
Next, I cut out four basic leaf shapes making 34 leaves. I drew leaves on the computer to print out. Note: I didn't wear gloves, but you can choose to wear gloves.
Then laying the shape on a strip of metal I traced the leaf with a pencil. Then cut out around the indented shape. Note: I didn't wear gloves, but you can choose to wear gloves. Remember "create at your own risk." There is a video on the website too.
So the wreath would read "dr pepper," I spray painted the backs! :)
Using an awl ( or nail would work too ) I made veins on the leaves.
To add color, I used chalked based paints and then alcohol inks. On some leaves, I used only alcohol inks.
Then I hot glued the leaves to a wire wreath frame.
Finished metal leaf wreath. The leaves could be painted in any color. Plus the leaf shapes could be any shapes.
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Country Design Style-Jeanette
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 29 questions
  • Mcgypsy9 Mcgypsy9 on Sep 12, 2020

    First of all this came out beautiful! I love fall leaves to begin with and anything made with them is a plus for me. I have tons of cans saved but haven’t tried doing anything with them yet. This sounds like a great starting point! You say you used chalk based paints and then alcohol ink. Do you have more detail of this on your blog?

  • Kgaletin Kgaletin on Nov 08, 2020

    Well done! I love your metal

    wreath.

  • Penny Barrett Penny Barrett on Nov 18, 2020

    I did not notice where you did anything with the edges of the leaves.... a soda can is very sharp. I would be afraid of getting cut. Does anyone have any ideas or suggestions for dulling the edges down

Comments
Join the conversation
2 of 268 comments
Next