How to Make Dollar Tree Storage Bins Look Like Pier 1

Amie
by Amie
5 Materials
$10
45 Minutes
Easy

The kitchen is the hub of our house. This is evidenced by the hodge podge of things you will find in my kitchen on any given day. It is near impossible to keep counters cleared off, so I’ve stopped fighting it and have hunted for practical counter top storage solutions.


After a couple of failed attempts, I decided to go the DIY route and bought some Dollar Tree storage bins. My mission was to make them look pretty.

I found these blue plastic bins at the Dollar Tree, but the bright blue didn’t go with my color scheme. I envisioned a lined bin with a woven look.

To start this project, I took some fabric that I had on hand and fitted it to the inside of the bin.

I had a yard of fabric but I only needed half of that for the size of my bin, so I cut it down using my rotary cutter. This cutter saves so much time. I folded my fabric over a few times and it cut right through it with no effort.

Next, I placed the fabric into the bin and cut off the excess fabric, leaving enough fabric to have an overhang to cover the lip of the bin.


Pull your fabric over the top and glue it to the underside of the bin, making sure you leave enough fabric inside the bin to reach the bottom. Any extra fabric overhang is fine because the rope in the next step will cover it.

If you want to secure the fabric to the bottom of your bin, put a few drops of glue at the bottom before you finish gluing your rim and press the fabric down.

As you glue the fabric to the bin, the fabric inside will start to bunch up. Every couple of inches, fold the fabric over to form a pleat and glue it down.

Once you finish the rim, it’s time to do the outside. My bin was 7 inches tall by 11 inches wide and 50 feet of rope was more than enough to cover the outside. I used Manila rope, but Sisal would look great too.

Take the end of your rope {there’s a pun in there somewhere} and glue it under the rim of the bin. Wrap it around the bin while gluing it every couple of inches. Hold the rope in place for a few seconds to allow the glue to dry.

Continue this until you get to the bottom of your bin. If you have extra rope, you can either cut it off or use it to cover the bottom of the bin.

These Dollar Tree storage bins are the perfect size for an entry way. You can toss in car keys, mail, and the random paperwork that accumulates throughout the week. They are also great for a bread or fruit basket. Or try them out as bathroom storage for rolled up wash cloths or even toilet paper rolls.



Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Amie
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 25 questions
  • Patty Patty on Jul 06, 2021

    If you are going to use it for fruit or something I would make the lining removable to wash it.

  • S. McManus S. McManus on Jul 06, 2021

    What did it cost you in supplies?

  • Pob27110870 Pob27110870 on Jul 07, 2021

    why don't you put elastic inside the rim of the fabric instead of gluing it the the container. then, it can be removed whenever you want ?



Comments
Join the conversation
2 of 164 comments
  • She48727965 She48727965 on Jul 07, 2021

    Awesome job my friend !!

  • Julie Julie on Jul 12, 2021

    So cute!! I have several of these baskets that I bought awhile back for another purpose, but now I know exactly what to with them. Thanks for sharing this! 🙂

Next