DIY Magnetic Key Holder

Lily Ardor
by Lily Ardor
2 Materials
$8
1 Hour
Easy
This key holder is super easy to make and comes with a free printable. (WITH VIDEO)

To start off you’ll need to drill three holes on the bottom of one of your 8″ boards. These holes need to be big enough to fit your magnets. First built a frame out of the long boards and then attach your flat board to the top. I used nails to do this and pre-drilled my holes to make it easier.


Following that take a napkin dip it into your wood stain and rub it onto your wood. Meanwhile I took my printable and evenly scribbled the back side focusing on the printed areas.  Once my backside was ready I lay the printable face up and taped it to my flat board. I then traced my silhouette (printable). When you lift your printable it should look something like the photo above. icon
I used a thin detailed brush and filled in my silhouette . Insert your magnets and you should be done. I attached a video down below.
If you guys like this tutorial you can see more awesome DIY's on my blog at the link below


----------------------------------------------------------------
To SIGN UP for my newsletter click this link and 'Follow' along to be sure you don't miss a DIY!'
_________________________________________________


Thank you for Joining me today. icon I hope you liked this DIYicon
You can get my FREE PRINTABLE down below in the link.
Suggested materials:
  • Wood
  • Wood stain
Lily Ardor
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next