Drop Cloth Wreath
by
Kristen Koehler
(IC: blogger)
4 Materials
$15
4 Hours
Easy
I recently painted the interior of my front door black (the exterior was always black) as part of a foyer update we are undertaking. You can read more about that here. I wanted a wreath for the door that wasn't season-specific. The walls of my foyer are a sage-y green with off-white trim and I have a black console table and just introduced the black door, so I wanted something neutral. I had been seeing these beautiful cream wreaths on the internet and was shocked to see they were made from simple drop cloth!
The first thing I did was order some drop cloth fabric and a 18" wire wreath form. All of the materials you need for the project are: drop cloth, 18" wire wreath form, scissors and a ruler. That's it! I couldn't find any details on how much material I would need for an 18" wire frame so I went ahead and purchased a 4' x 12' canvas drop cloth. This provided more than enough (I did have some strips left over, but not too many) to create a full wreath.
First, I laid out the fabric and cut the canvas drop cloth into strips. I found varying dimensions cited online depending on who was making the wreath, but I went with 1″ strips that were 9″ long.
Don’t worry about cutting each strip perfectly, the wreath is meant to be a bit rustic. I eyeballed the inch width when cutting the fabric into long strips,but did use a ruler to measure out the length.
Then I simply started tying the strips onto the frame. I started on the inside ring of the wreath, tied them all around and then moved on to the next outermost ring and repeated for all four rings. You can tie on as few or as many as you can fit in each section of the wreath. I chose to tie on as many as I could comfortably tie in each section because I wanted a really full looking wreath. Tying the strips on is a great activity to do in front of the TV. Know that the drop cloth fabric does fray and you will get strings all over whatever chair or couch you are sitting on - but nothing that a vacuum can't handle afterwards .
Here is a close up of the finished wreath on my newly painted door. I love the contrast of the light wreath on the black door, don't you? To hang it I used a command hook and used a pipe cleaner around one of the wire rings to create a hanger.
Here's a shot of the full door. Let me know what you think!
Enjoyed the project?
Suggested materials:
- Drop Cloth (Amazon)
- 18" Wire Wreath Form (Amazon)
- Scissors
- Ruler
Want more details about this and other DIY projects? Check out my blog post!
Published October 13th, 2017 2:25 PM
Comments
Join the conversation
3 of 67 comments
-
Easy does it on Aug 19, 2019
Easy Does It
I love that it is so easy. I saw one similar to this with old jeans. I will make one with jeans and drop cloth. Thanks for the idea.
-
Michelle Moody on Aug 19, 2019
I made one with old sheets from my grandmother
-
-
-
Frequently asked questions
Have a question about this project?
Did you use drop cloth on the rear of the wreath form as well as I would be worried that this could scratch the paint on the door
Omg...I have made blue jean/red bandana wreath with daisies...Christmas Wreath, and Spring wreath...I have a brand new drop cloth that is calling for a wreath to be made...TFS
What was the size of the drop cloth? Was the whole drop cloth used?