Repurposed Ceiling Fan or Chandelier Lamp Shades

4 Materials
$3
1 Hour
Easy
Got an old ceiling fan that needs replacing? Or a chandelier that needs updating? Don't throw it all out - repurpose it into solar lights! If you don't have any that need replacing, don't worry. You can easily find the lamp shades at your local thrift store for about $1 a piece.

You will need some glass lamp shades, the same amount of solar lights and some wire for hanging your lights. I used the cheap $1 ones you can find at walmart or the dollar store and they fit perfectly.
The only part of the solar light that you need is the top half - you don't need the stake or the post, but save it just it case you can repurpose that ;)


This step is optional, but I wanted to add a little bit of color to my lights. I tape off the top of the solar light with some painters tape and painted the top of my lights white. I also had some leftover seaglass spray paint so I gave my lamp shades a quick coat of the green seaglass color just to give it a little touch of something more.
Then take your wire and wrap it around the top part of your lamp shade. They usually have a bit of a grove on the top so that you can wrap the wire around nicely without it falling off. Make sure you also leave a loop in your wire so that you can hang your lamp shade.


Once you have your wire on, you just need to set your solar light on top of your shade. You can use some E6000 glue or some caulk to hold it in place if you need to. I leave mine to sit freely and they've never fallen off, plus this way I can easily replace the light if I need to.
Then use some sheperds hooks or hang them up however you choose! I placed about 4 of them along a little walkway through my garden and they light up so nicely at night and leave a nice glow on the ground as well.


Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Jennifer | CrazyDiyMom
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • Kimberly Montgomery Kimberly Montgomery on Jan 22, 2018

    If you were to set the lights using glue, couldn't you use an exacto knife to cut it should you need to replace the light itself? We get EXTREME winds here frequently and I know the lights would be flying off if they weren't attached.

  • Suzy3a Suzy3a on Jan 23, 2018

    I wonder how these would work attaching them to our deck posts?

  • Dot Dot on Feb 03, 2018

    Did you use "stick" solar lights or the post type as shown in the "materials needed" section?

Comments
Join the conversation
2 of 31 comments
  • J Brown J Brown on Oct 29, 2020

    I loved how you used the old ironing board as a work surface!

  • Mic82983013 Mic82983013 on Aug 04, 2023

    This is genius. If you used clear silicone caulk, it secures the solar panel piece and silicone peels up off glass very easily when time to replace the panel.

Next