Farmhouse Serving Tray

Wendy
by Wendy
9 Materials
$20
2 Hours
Easy
A neighbor was throwing out an old cabinet door, and I couldn't let it be thrown out. So I took it home and finally came up with a plan! Watch how I transformed it into a chic serving tray.
First, I wiped it clean and got to sanding it!
I made sure that any loose wood chips or pieces of dirt were gone.
Then, once it was all clean, I decided to give it a white washed look. I mixed a bit of white acrylic paint with a bit of water and gave it a light coat.
Once it dried, I got ready to image transfer! This is something I've wanted to try for awhile, so I was pretty excited!
I chose to go with the Mod Podge method. First, I painted a light layer of mod podge over the printed image. Make sure to cover the image itself and not only the paper it is printed on.
Then, I laid the image face down on the surface.
And let it dry overnight!
Once it completely dried, I wet the paper and let it soak for about 60 seconds.
Once the paper was completely soaked through, I began to rub away the paper. As the paper peeled off, I could see my image peeking through.
I peeled off all of the paper and wiped the surface down with a wet rag. Then I brushed on a layer or varnish.
Then, I attached two drawer pulls as handles on each end of the tray. Now it is a functional serving tray!
I am in love with my new morning coffee station ;)
Resources for this project:
acrylic paint
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • Lin1263925 Lin1263925 on Mar 10, 2018

    i love what you did I just wanted to ask if there was a special ink in the printer very nice again linda

  • Suzanne Suzanne on Mar 11, 2018

    Did you cut off the end that was slanted to square it up?

  • Arlene Ellerbrock Arlene Ellerbrock on Mar 19, 2018

    Not sure I understand, but did you apply the Modge Podge ONLY to the image itself?

Comments
Join the conversation
2 of 44 comments
Next