DIY Dog Bowl Stands

10 Materials
$50
2 Days
Easy
Duke and Duchess do everything in style. We’re a little dog obsessed over here, if you haven’t figured that out by now. A few months ago they got their very first Rae Dunn XL dog bowls. I decided it was time to take them to the next level, for a few reasons. Duke and Duchess are large dogs, and I felt bad that they looked hunched over while they ate their food. So I got it in my head that they needed a stand, for practical reasons… ya know?
o this DIY, like all DIYs started at Home Depot. I’m pretty familiar with the wood section, because of all the  signs I’ve been making recently. I saw these 6 inch legs and thought they would be PERFECT for the dog bowl stand base.


Duke and Duchess each get their own stand. So I needed 8 of these coffee table legs.


In order to build the frame to hold their bowls, I bought an 8ft x 6ft  and 1in x 2in pieces of wood and stained them. I’ve used this wood before, so I know it holds up pretty well! I always aim to use pieces that have a lot of interest in the wood. The more grooves, knots, and nicks, the cooler it looks when it’s stained.
After I finished staining it, I let it dry for 24 hours.
When it was dry, I used the bowls to measure how much space I would need for the tray. I played around with the spacing a little and landed on 17.5 inches. I used a table saw to cut the wood pieces to length. I cut four 8 inch pieces for the sides of the trays and nailed them into place with my nail gun.
When it was dry, I used the bowls to measure how much space I would need for the tray. I played around with the spacing a little and landed on 17.5 inches. I used a table saw to cut the wood pieces to length. I cut four 8 inch pieces for the sides of the trays and nailed them into place with my nail gun.
After the frame was completed, I stained the exposed corners!


Next, I turned the frame upside down. I lined up the table leg with where I wanted it to be positioned and I made a divot with the exposed screw at the top of the leg. That mark is the drill spot!
I used a drill bit and drilled partially into the wood, just enough to be able to screw the legs in. Be sure you don’t pop through the other side!
Last step! I used a polycrylic water based sealer to protect the wood. This is for dogs after all, and our little royals are messy! I wanted to make sure that I protected what I built, but more importantly, I don’t want any excess food or slobber to become a breeding ground for bacteria. By sealcoating the wood, I was able to make it an easy to clean surface!
Look how happy they are with their new food bowl stands!


to see more pictures of DIYs and Duke and Duchess, follow me on Instagram! @thediy.doghouse
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
The DIY Doghouse
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Leslie Leslie on Aug 13, 2018

    Your pups are gorgeous, Staffordshire Terriers??? Love them. The stand isn't half bad either lol. Thank you for posting.

Comments
Join the conversation
2 of 27 comments
  • Brenda Simpson Brenda Simpson on Jan 06, 2021

    This is a great idea! I think I could even have them cut the lengths. Most veterinarians are now recommending raised bowls for all dogs! ( at different heights according to breed/size of your pet). So this will make it more healthy as well! Good job and thanks!!

  • Peggy L Burnette Peggy L Burnette on Nov 05, 2023

    Beautiful dogs. Thank you for sharing, our 130# Dogo and our 110# Pitty will love this.

Next