Installing Banquette Bench Booth Seating In Your Kitchen
If you love this project, grab your quick start DIY guide & subscribe to our blog!
This banquette bench tutorial post is brought to you by Columbia Forest Products / PureBond Hardwood Plywood. All opinions are entirely my own and based on my honest experience.
If you’ve always dreamed of having booth seating or a corner storage bench in your breakfast nook, you’re in luck. You’re going to love this detailed tutorial for how to build a banquette bench in your kitchen!
MEASURE SPACE AND PLAN YOUR BANQUETTE BENCH
This step is so obvious, I know! But it doesn’t hurt to mention that the planning (and measuring) portion of building your banquette bench is one of the most important parts.
REMOVE BASEBOARDS
The baseboards in the corner of your kitchen will need to be removed in order to install your corner bench seating.
BUILD INTERIOR FRAMING
These provide the major structural support for the bench. Once these are installed, the plywood will attach directly on to the framing.
BUILD BACK OF BENCH FRAMING
The 2x4s for the framing on the back of the bench are angled at approximately 5 degrees. To get these cuts, we built a jig for the table saw.
INSTALL INTERIOR AND BACK FRAMING.
Start with the corner framing brackets. They should fit together to form a box in the corner of your breakfast nook.
INSTALL FRONT PANELS TO BENCH
First, add some wood glue where the panels will touch the brackets. Then clamp them into place and levels with wood shims on the floor.
ADD HINGES
Last step is to get that bench seat attached with hinges to make it a corner storage bench with lifting seats.
To learn more about this project and see more pictures and details, visit the full blog post here.
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Sandy on Apr 27, 2020
This size looks a lot like what I've been wanting but can't figure out what type table to use: Round, oval, pedestal what.....I like the idea of a pedestal because the outside legs would not be in the way when walking around it....and I desperately need storage...what is the general cost of something like this and how many chairs did you get for around the outside...Thanks so much, good like....4-27-20
-
-
Frequently asked questions
Have a question about this project?
Do you have a picture of the “innards” of the supports of the bench? All we see is the corner piece and the back.
that looks great 👍
1 question - why is your light hanging so low?
is this all attached to the wall or is it moveable if you decide you dont want it anymore??