Pinecone Winter Wreath

Sarah
by Sarah
5 Materials
$8
1 Hour
Easy

Seasonal wreaths are a great way to display some decor both inside and outside your house and also a great handmade holiday gift idea. Unfortunately, they are also pretty expensive if you buy them from the store. The good news? They are super fast and easy to make! This wreath was inspired by some pinecones my mom and I collected while camping over the summer. They were the perfect thing to make this DIY Pinecone Winter Wreath for almost no money at all. Read on to see how I did it!

Supplies
  • Length of time for project: less than one hour, start to finish
  • Cost: $7
  • What you’ll need: Lots of pinecones, different sizes. Additional filler/greenery (I used fake sprigs from Joann’s fabrics). 12″ wire wreath form. Twine. Glue gun.
  • What I learned: This project is kinda messy! My pinecones were wet and dirty when I brought them in. After drying them in the oven, I dusted them off which left a bit of a mess. Then, glitter was on my sprigs…enough said. Also, wrapping the wreath form with twine was tedious but it adds stability and more surface area for the glue to stick to so I would recommend you do it too. 


Wrap your Wreath Form

This pinecone wreath was super quick and easy to pull together and I just love how it turned out! You will need to start with a 12 inch wire wreath form which I purchased from my local Joannes fabrics for about three dollars. I then wrapped it with twine that I had on hand to provide more surface area for the hot glue to stick to. This part was a tad tedious…but I think it is worth it. 

As I said before, most of the pinecones were collected with my mom when camping over the summer. I didn’t count them but I had about 3/4 of a target shopping bag full. The smaller pinecones were found in my side yard and they were perfect fillers…not to mention super cute!

Beware! Pinecones are dirty! Or at least mine were. Put them in the oven on a lined baking sheet at 250 degrees for about half an hour, just to dry them out a bit. Then wipe them off just using a dry paper towel.

Hot Glue the Pinecones

The larger pinecones were attached on the outer edge about 2/3 to halfway inside the wire frame so there was enough surface area for them to adhere to, just using hot glue. You will see there is a little space between my larger pinecones. Honestly this was just a factor of the amount of pinecones that I had on hand. If you want a fuller looking wreath you could collect more and put them a little closer together.

Also from my local Joannes fabric store, I purchased a few little bundles of these pinecones and berry sprigs. These were then cut apart using wire cutters and spread around to add a little color and filler to the wreath.

Lastly, I filled in with these tiny little pinecones I found out in my yard. Super lucky to have a ton of these nearby because they really make a great filler in between the larger pinecones and on the edges!

And you are done! Just like that. Super fast, super easy. It maybe took me an hour from start to finish. Now to just find a box big enough to ship this super cute pinecone wreath to my mom in time for the holidays…

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Sarah
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Em Em on Dec 04, 2018

    Just curious. Instead of going to all of the trouble of wrapping the twine, why not just use a styrofoam form instead? I have made these with the straw forms but they become pretty heavy.

Comments
Join the conversation
2 of 19 comments
Next