How to Get The Arhaus Look

11 Materials
$60
3 Days
Medium

It's not easy to reverse-engineer a finish for a piece of furniture but I was willing to give it a shot.

I've worked on some pieces in the past where I had used a similar technique.


I had some clients of mine come to me with a challenge.

"Can you give this buffet the ' Arhaus' look?"


You can check out the whole blog post & all the pictures on my site: amandasmercantile.com


They provided this picture from one of the company's catalogs and pointed out that it was the Earl Grey finish on the table that they wanted to recreate.


I first had to take off the slick, orange finish that the buffet was currently wearing.

After removing the door and drawers, I sanded the whole piece down to the raw wood. The original finish didn't put up too much of a fight and I was able to able to get the whole piece sanded in an afternoon.

Thank goodness!

After cleaning away the dust I started to think up a strategy to get the weathered look.I started with watering down some Valspar Belgian White paint.

2 parts paint, 1 part water.

I haphazardly brushed the paint mixture on, leaving it on for about a minute and then wiping it away with a damp rag.

I did 3 coats of this technique until I got my desired look.

After letting the layered white wash dry over night it was then time to add a stain combination.I consulted my stain stash and I chose Minwax's Classic Gray and Jacobean to layer on.

I also add weather oak to the mix just incase.

Using some latex gloves to protect my hands, I applied the first coat of stain with foam brushes and then wiping it off with a clean rag.

I started with classic gray and decided against using Jacobean because I felt like it had a little too much red in it.

I choose to use weathered oak instead to enhance the gray.

This is what 2 coats of classic gray and 1 coat of weathered oak over the white wash looked like:

The was still too much of the orange from the raw oak showing through and we need to darken the grain of the wood.I thought maybe a black stain would help to combat the warmth but I was fresh out!My solution was to cut a little bit of black paint with some water, brush it on and wipe it away with a damp cloth ASAP.

This is what it the black-wash cover looked like after one coat vs just the classic gray & weathered oak stain layers:

Brushing it on and using a damp cloth to wiping it off after a few seconds was key to keeping the paint from saturating the entire piece.Finally I just had to stop and walk away.There is such a thing as over-working something and a project like this could easily get away from me.I let it sit over night before completing the final touches and the last thing to apply before adding hardware was a top coat.I like to use Minwax's water based polycrylic protective finish in clear matte for almost everything I work on and this project was no exception.

All it needed was a thin coat.After letting it dry it was time to add hardware.I tried using what the buffet came with originally but the client wanted to mix it up and we decided to try painting the hardware black.(Before)

I didn't want the black to look too new so I did a light mist of an age bronze spray paint on top.I styled the piece with some ironstone mixing bowls and an old bull horn.This piece has a lot of structural detail already and could easily be over-styled if I add much more. 

I had the chance to try to re-create the Arhaus 'Earl Grey' finish and it might not be perfect but I think I got pretty close.It was a beautiful day when I took theses pictures so It looked very light-n-bright. 

The hardest part of this whole project was finding the right combination of paint and stains to toning down the natural orange-i-ness of the oak.I was hoping to achieve the look with less product (paint, 2 different stains, more paint) but I'm okay with where we ended up. 

You can also watch the YouTube video HERE of the entire process!


Product List:





  • Rags
  • Foam Brushes
  • Latex Gloves
  • Sandpaper
  • Valspar Paint - Belgian White & Lincoln Cottage Black
  • Minwax Stains - Classic Gray & Weathered Oak
  • Minwax's Polycrylic Protective Coat in Clear Matte
  • Black Spray Paint
  • Age Bronze Spray Paint

 

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Amanda's Mercantile
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 6 questions
  • Tess Boyer Tess Boyer on Mar 17, 2019

    I am building a tiny house and plan to do something like this to a rolling table/island that has the drop side and bar stools. I am wondering about the finish. Is it safe to eat off of as I will have 2 g’babies living with me?

  • When you applied the black paint did you water the paint down as you did with the other paint? I have an Apostrophe Cabinet that is beautiful but needs an update and I believe this is a perfect application for it! I’m excited to get my SheShed in a couple of weeks and then I can start working on it!! I ended up paying only $20 for it because they could not find anyone to buy it. I was happy to take it off their hands.

  • Patricia Howard Patricia Howard on Jun 29, 2020

    What grit sand paper did you use. I have a chest of drawers that needs to be refurbished, but I have never done anything with this slick orangy finish, Did you just sand and sand only?


Comments
Join the conversation
2 of 39 comments
Next