Epoxy & Wood Clock

Or Misgav
by Or Misgav
8 Materials
$15
4 Days
Easy

It all started when I was stuck in a traffic jam.

Instead of getting frustrated and upset as I usually do I tried looking at the view outside and just then I noticed a majestic log laying on the side of the road.

Without giving it a second thought I rushed outside (traffic was standing still) and took it with me.

the final clock

My husband sliced the log using a chain saw.

Once it was sliced, we discovered that our olive tree log used to be an ant colony, which was great! The big hole in the middle would be a perfect fit for a clock mechanism.

We took a sliced wood and sealed it using a simple "white glue". Sealing prevents air that is trapped inside to come out in a form of bubbles during the epoxy cast process.

We let it dry in the sun for an hour.

We measured and mixed the epoxy resin with a beautiful metallic olive-green pigment.

When the epoxy was ready, we poured it into a plastic plate.

After 48 hours the epoxy cured completely. We removed it from the plastic plate that served as a mold.

Using an eccentric sander we smoothed the surface and leveled the wood. When sanding Epoxy it becomes opaque but applying a second layer of epoxy makes it transparent again.

Then, came the messy part.

Using a Makita router we made a hole in the back of the soon-to-be clock for the mechanism.

The wood was still semi-wet underneath the epoxy, which made sawdust fly everywhere when we were cutting.

Once the hole was big enough for the mechanism to fit, we drilled a hole for the clock hands.

We applied a thin second layer of Epoxy to have a nice vivid finish. We set it to cure for the night.

At the top of the clock we drilled a blind-hole (a hole that doesn't go through) to hang it on the wall

After everything was set, we purchased black plastic digits and glued them to the clock using a ruler in order to position them in the right place

We weren't happy with the color of the clock hands, which made it hard to read. So, we sprayed them with a golden-brown color.

The final product ready to be hanged

We still have a few other sliced woods we don't know what to do with. If you have any idea, you are welcome to post it in the comment section below.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 4 questions
  • Mary Mary on Apr 03, 2019

    Did you notice that if turned up side down it looks a lot like a map of my adopted home state. West Virginia very nice.

  • Rye Guischer Rye Guischer on Apr 10, 2019

    Why not make lights for your bedside nightstand? Would b absolutely gorgeous.

  • Rosario Genis Valdez Rosario Genis Valdez on Apr 18, 2019

    Why don’t you use them in your kitchen to put your hot food pots on top when you’re serving dinner/lunch/breakfast you know??like hot pads (only made with wood)

Comments
Join the conversation
2 of 36 comments
Next