DIY Circle Shelf - From Salvaged Wagon Wheel

Heather Cammack
by Heather Cammack
7 Materials
$10
2 Hours
Easy

Making a one-of-kind circle shelf is a lot easier than you may think. I've had two old wagon wheels wasting away in my yard that were left here by a previous homeowner. Even though wagon wheels don't really fit into my personal style, I decided to find a way to salvage them into our decor. After a bit of thought, I decided to turn one into a circle shelf.


A quick and important note to make is that you don't have to go hunting for a wagon wheel. Any round salvaged item out there can be shelfified using this tutorial. Get creative!


Be sure to click on the link to my blog for a more detailed tutorial, and lots more DIY inspiration.

This was my starting point. I went ahead and gutted my wheel then gave it a warm bath of water and dish soap. I was trying to ease it into it's new life as an interior decor piece. Welcome to the family you goofy old country bumpkin!

I measured across the wheel in the places I decided I wanted to put shelves. Because I plan to fill my shelving with mostly plants and/or candles, I opted for two shelves to give lots of room.


I also think this circle shelf would make a great spot for a collection of photos.

Next, I marked my wheel where I wanted the tops of my shelves to be. An easy way to do this is to push your circular salvaged object up against a flat surface. Then measure the distance from the flat surface to the circle and mark. Do this on both sides.

After I had my shelf location all figured out, I trimmed my boards to a rough length just a tad longer than what I needed.


Then, I laid my boards over the wheel, lining them up with the marks from earlier. Using a pencil, I traced on the board using the wheel as a guide.

The traced line makes a great template for trimming the boards to length.


For reference, my wheel is about 3 inches wide, and the boards I used are 1x4.

Using some E6000 glue, I attached the shelves to my wheel. Cutting some wedges from scrap wood helped keep the shelves in place as the glue dried.


You may also notice that I sneakily painted my wheel without documenting. This is because I get so excited about an idea, that I often forget about my camera. However, I sprayed the wheel with a stain covering spray primer, and gave it a topcoat of black chalk paint.


If you would like to paint your wheel, you do not need to use chalk paint, that's just what I happened to have on hand. I would suggest using a good stain/rust covering spray primer though.

To keep from killing my family, I hung my shelf with a heavy duty lag bolt screwed into a stud. After all, my wheel weighs about 60 pounds.


I might get around to painting the bolt, and if you're not as impatient (lazy) icon as me, I say go for it.

And then I starting loading her up with plants. I plan to collect a few more and use this as a, sort of, living wall decor piece.


I hope you find this post helpful and it gets the creative juices flowing!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Heather Cammack
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 6 questions
  • Penny Wyngarden Penny Wyngarden on Apr 11, 2019

    Couldn't u have made shelves out of all the legs in the wheel

  • Judy Mckie Judy Mckie on Apr 18, 2019

    I like it. wwonder if something could be made from the bars?probably not. look in bad shape. lol.


  • Sandra Christian Sandra Christian on Apr 18, 2019

    Did u angle the cut of the boards (shelves)? Looks like it but u didn’t mention it?

Comments
Join the conversation
2 of 70 comments
  • Janie Janie on Jun 25, 2019

    You did great and it's a nice piece of wall art! Like the arrangement with the hanging plant to the left. Good placement! Thought maybe you could have painted the shelves black but on second thought I think I like the contrast better.



  • Johanne Palange Johanne Palange on Aug 29, 2020

    Wagon wheels being hard to come by in most parts of the world, I would try adapting this idea using a hula hoop.

Next