DIY String Light Posts

6 Materials
$50
2 Days
Easy

Hi friends! It doesn’t have to be expensive or fancy to be cozy! We added string lights over our backyard patio to create the perfect cozy hang out spot! ✨

When we first bought our house, the bushes were overgrown and the rest was bland and boring! We tore out a whole bunch of bushes, added some new plants and crushed stone with a paver border. For more of our fixer upper journey, click here!

Drab to fab! 😅 In a perfect world, I would love to have a pergula or maybe the roof extended over the patio, but those are not right now things.

So for now, we did string light posts! I didn’t want the posts to be permanent, so we concreted them in buckets and then buried them, instead of digging a hole and dumping the concrete in the ground. This way we can easily pull them out later. If you aren’t worried about that, you could omit the buckets! We started by spraying the inside of a 5 gallon bucket with WD-40 to get it all slicked up, then we dumped about a 1/4 of the bag of this fast-setting concrete mix in, sprayed in some water from the hose and stirred it up with a shovel. We kept doing that until the bag was empty - we used 1 bag of concrete mix for each 5 gallon bucket. We made our concrete a little soupy, so we could easily wiggle our 4’ x 4’ x 10’ treated post down to the bottom of the bucket. We made sure the post was centered and then put a piece of scrap wood long enough to sit on top of the bucket in front of and behind the post to hold it there. We did the same process twice, since we needed 2 posts. Also, the fast-setting concrete sets up in 20-40 minutes, so don’t take any breaks!

We let the concrete sit over night just cause we are worriers and then the next morning we cut the buckets with my little hackzall. I didn’t get any photos of the posts with the concrete blobs on the bottom, but I’m sure you get the picture!

I stained the posts with Minwax Special Walnut and then we buried them, with some supervision. 😝 To see more of this cute pup, visit my Instagram!

I added these little hooks to the top of each post and in 3 spots on our fascia to string the lights from the house to the posts. I used my drill and a drill bit a little smaller than the threads on these hooks to pre-drill my holes.

Then it was time to string the lights! We used 4 boxes of lights.


So cozy, right!? ✨✨✨

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 4 questions
  • Jane Jane on Aug 12, 2019

    I really like the addition of the gravel and bricks as well as the lights. Looks so much friendlier. For me the only thing missing are privacy screens with some greenery. Maybe your next project? Nice job.

  • Robyn Garner Robyn Garner on Aug 15, 2019

    Now that you've got the weighted posts, have you considered getting a sail shade to attach to them and your roof for the shade you said you want? It would be simple!

  • Ghettozoo Ghettozoo on Nov 29, 2020

    Did the 4x4 post warp or bend now that it has been a year?


Comments
Join the conversation
4 of 55 comments
Next