Vinyl Tablecloth Kitchen Table Makeover
It's pretty easy to give a dated and worn old kitchen table a whole new look with just a vinyl tablecloth and some decoupage medium.
Here's the before of my vintage dining table. It has great bones, but was showing some wear after being used for years.
It was time to give my table a fun and funky makeover to go with the rest of my kitchen.
To start the makeover I gave the whole table a light sanding with a sanding block, preparing for painting.
I painted the top white and the legs and skirt the same blue as the chairs. The reason I painted the top is because I wasn't sure if the wood underneath would show through the vinyl tablecloth.
Whenever using a decoupage medium I always like to start with white underneath, just to keep things nice and bright.
Here's the fabulous vinyl tablecloth that I found at my local dollar store. I really needed to add some floral to my aqua and red kitchen, and this was perfect.
After spreading it out on the table I cut it down closer to the actual size that I needed.
This just made it easier to work with.
I decided to remove the flannel backing of the vinyl tablecloth. To see how I did this check out my Kitchen Table Makeover blog post here.
I spread the decoupage medium over half of the table and folded the tablecloth over that.
I had to move really fast because the medium can dry very quickly.
I smoothed it out with my hands and with my brayer.
I did the same to the other half of the table.
When it was all dry I trimmed the tablecloth, following the decorative lip of the table.
To finish it off I applied two top coats or the decoupage medium, letting it dry completely in between.
Here's the before, after my kitchen chairs makeover.
And here's the after. It's so easy to clean because of the vinyl, and the two coats of decoupage medium give it some extra protection.
You can find more of my kitchen makeover projects here.
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
-
Tuula - Color Me Thrifty on Feb 22, 2024
Thanks very much Pammy!
-
-
-
Linda Ross on Feb 22, 2024
This is very cute but I foresee having to redo the table top too soon for my taste. It may be vinyl but this kind of cheap vinyl wears and quickly. I know this from experience. Just as well use fancy paper napkins and either use epoxy or several coats of poly.
-
Frequently asked questions
Have a question about this project?
ModPodge isn’t really waterproof and can get yucky when wet. Was there anything you did to seal it up after the modpodge?
Not a question, just want to say how great that looks. Really pops against the darker floor. Nice job!
I am so glad I revisited this page. I was wondering if this would work with a fabric tablecloth as well? or would I have to use resin with it? I would prefer the mod podge. thanks